Winton 1.75m Hydraulic Offset Tractor Flail Mower W‑HF175

The W-HF175 is the mid-width model in Winton's hydraulic-offset flail range. Wide enough to clear paddocks and orchard rows at a sensible pace, but still inside what a 30–55 HP Cat 1 compact tractor can carry and offset cleanly.

Reach into the rough without moving the tractor

The hydraulic A-frame shifts the head sideways on one double-acting spool and two hoses. Hedge bottoms, fencelines and the awkward ground around trees come into reach while the tractor stays on firmer footing. For boundary work on uneven ground, that is the difference between a clean pass and a stop-start crawl.

Heavier flails, finer finish when you want it

Twenty-eight hammer blades sit in a spiral pattern on the rotor. They handle overgrown grass and weeds, and — used regularly on shorter grass — leave a finer cut suited to larger lawns or paddock tops. A rear roller and twin height-adjustable skids set the 3–8 cm cut and keep the deck off the ground on bumps and hollows.

• Hydraulic offset A-frame as standard — 1 double-acting spool, 2 hoses
• 1.75m working width, sized for 30–55 HP Cat 1 compact tractors
• 28 hammer blades in a spiral around the rotor
• 3–8 cm cutting range, adjusted via rear roller and two skids
• Belt-driven rotor with 3 drive belts, PTO powered
• Heavy-duty gearbox
• Lower linkage width 77–92 cm, weight 350 kg
• Mounts to the three-point linkage of small and compact tractors