About the International Harvester 284
Engine Horsepower: 28 hp
Manufactured: 1976 to 1984
International Harvester 284 Summary
The International Harvester 284 tractor was produced from 1976 to 1984 as part of the 84 Series by Komatsu in Japan. It features a 30 hp engine with options for a Mazda 1.2L 4-cylinder gasoline or a Nissan 1.6L 3-cylinder diesel engine. The tractor offers 8-speed transmission and came in variants of 4x2 2WD or 4x4 MFWD 4WD after 1982, available only with the diesel engine.
International Harvester 284 Horsepower, Weight, and Specifications:
Production
Who manufactured the International Harvester 284 tractor?
- Distributor: International Harvester
- Manufacturer: Komatsu
- Type: Compact Utility Tractor
- Location: Built in Japan
- Original price: $5,000 in 1984
Engines
What engines are available in the International Harvester 284 tractor?
- Gasoline engine: Mazda 1.2L 4-cyl
- Diesel engine: Nissan 1.6L 3-cyl
Transmission
How many speeds does the transmission of the International Harvester 284 have?
- Transmission: 8-speed
Horsepower
What is the horsepower output of the International Harvester 284 tractor?
- Engine: 30 hp (22.4 kW)
- Drawbar (claimed): 21 hp (15.7 kW)
- Diesel PTO (claimed): 27.4 hp (20.4 kW)
- Gasoline PTO (claimed): 25.8 hp (19.2 kW)
- Drawbar (tested): 21.98 hp (16.4 kW)
- PTO (tested): 27.47 hp (20.5 kW)
Mechanical
What are the mechanical features of the International Harvester 284 tractor?
- Drive: 4x2 2WD; 4x4 MFWD 4WD (optional after 1982 with diesel engine)
- Steering: Manual
- Brakes: Hydraulic wet disc
- Operator station: Open operator station, optional two-post ROPS with canopy
Capacity
What are the fuel and hydraulic capacities of the International Harvester 284 tractor?
- Fuel: 8.7 gal (32.9 L)
- Hydraulic system: 3.4 gal (12.9 L)
Hydraulics
What are the hydraulic specifications of the International Harvester 284 tractor?
- Capacity: 3.4 gal (12.9 L)
- Pressure: 1920 psi (132.4 bar)
- Total flow: 6 gpm (22.7 lpm)
Tractor Hitch
What type of hitch does the International Harvester 284 tractor have?
- Rear Type: I
- Control: Position control
- Rear lift (at ends): 2000 lbs (907 kg)
Power Take-off (PTO)
What are the PTO specifications of the International Harvester 284 tractor?
- Rear PTO: Transmission
- Rear RPM: 540/1000
Dimensions & Tires
What are the dimensions and tire specifications of the International Harvester 284 tractor?
- Wheelbase: 68.6 inches (174 cm)
- Weight: 2050 to 2740 pounds
- Front tire: 5.00-15
- 2WD Rear tire: 11.2-24
Electrical
What are the electrical specifications of the International Harvester 284 tractor?
- Charging system: Alternator
- Gas Charging amps: 35
- Diesel Charging amps: 20
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.