Verified fitment for your tractor

Tractor Attachments for the John Deere 2010

Your tractor
John Deere 2010
Production
1960 to 1965
Power
51 hp
Class
compact tractor

Tractor Flail Mowers for the John Deere 2010

Built for paddocks, headlands and verges where a topper leaves rows of cut material behind. Hitch it to your John Deere 2010 and the flails chop and mulch brambles, brush and overgrowth as you go.

Tractor Topper Mowers for the John Deere 2010

Hitch a topper to your John Deere 2010 for fast rough-cuts across pasture and paddocks, or a finishing mower for a tidy lawn-style finish on estate grass. Quicker and lighter work than a flail when the grass isn't rank.

Tractor Hedge Cutters for the John Deere 2010

Hitch one to your John Deere 2010 to trim hedges and roadside verges from the tractor seat. The boom reaches into hedge tops and over field-edge banks where a fixed flail or topper can't, with its own PTO-driven hydraulics so it doesn't fight your tractor's spools.

More Products for the John Deere 2010

Discover more implements compatible with your John Deere 2010. Rotavators and wood chippers and more.

About the John Deere 2010

John Deere Logo

Engine Horsepower: 51 hp

Manufactured: 1960 to 1965

John Deere 2010 Summary

The John Deere 2010 was produced from 1960 to 1965. It is part of the New Generation Series and is classified as a row-crop tractor. The 2010 was built in Dubuque, Iowa, USA, and originally priced at $4,600 in 1965. Variants include the 2010 ag tractor, 2010C ag crawler, and the 2010 Wheel industrial tractor. It features a 39.28 hp drawbar and a 46.86 hp PTO.

Tractor Icon

John Deere 2010 Horsepower, Weight, and Specifications:

John Deere 2010 Production

Where was the John Deere 2010 manufactured and what was its original price?

  • Manufacturer: John Deere
  • Type: Row-Crop tractor
  • Built in Dubuque, Iowa, USA
  • Original price: $4,600 in 1965

Variants

What variants of the John Deere 2010 were available?

  • 2010: Agricultural tractor
  • 2010C: Agricultural crawler
  • 2010 Wheel: Industrial tractor

Engines

What engines were available for the John Deere 2010?

  • John Deere 2.4L 4-cylinder gasoline
  • John Deere 2.7L 4-cylinder diesel
  • John Deere 2.4L 4-cylinder LP gas

Transmission

What type of transmission did the John Deere 2010 have?

  • 8-speed

Horsepower

What was the tested horsepower of the John Deere 2010?

  • Drawbar: 39.28 hp (29.3 kW)
  • PTO: 46.86 hp (34.9 kW)

Mechanical

What are the mechanical specifications of the John Deere 2010?

  • Drive: Two-wheel drive
  • Steering: Manual, Power (Optional)
  • Brakes: Differential mechanical dry disc brakes
  • Operator station: Open

Capacity

What are the fuel and hydraulic capacities of the John Deere 2010?

  • Fuel: 16 gal (60.6 L)
  • Hydraulic system: 8 gal (30.3 L)

Hydraulics

What hydraulic specifications does the John Deere 2010 have?

  • Type: Open center
  • Capacity: 8 gal (30.3 L)
  • Pressure: 1150 psi (79.3 bar)
  • Valves: 1 or 2
  • Total flow: 11 gpm (41.6 lpm)

Tractor Hitch

What type of hitch did the John Deere 2010 have?

  • Rear Type: II/I
  • Control: Position and draft control

Power Take-off (PTO)

What are the PTO specifications of the John Deere 2010?

  • Rear PTO: Independent (Optional)
  • Rear RPM: 540/1000
  • Engine RPM: 540@1900

Dimensions & Tires

What are the dimensions and tire specifications of the John Deere 2010?

  • Wheelbase: 87 inches (220 cm)
  • Weight: 5054 to 5120 pounds
  • Front tire: 6.00/6.50/7.50-16
  • Rear tire: 12.4/13.6/14.9-28

Electrical

What are the electrical specifications of the John Deere 2010?

  • Ground: Positive
  • Charging system: Generator
  • Gas Battery CCA: 420
  • Diesel Battery CCA: 625
  • Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.