John Deere 5225 Specifications
Engine Horsepower: 56 hp
Manufactured: 2005 to 2008
John Deere 5225 Summary
The John Deere 5225, produced from 2005 to 2008, is a utility tractor in the 5025 Series. It features a 56 hp engine and has a claimed PTO of 45 hp, with a tested PTO of 47.59 hp. Manufactured in Augusta, Georgia, the tractor offers variants including 4x2 2WD and 4x4 MFWD 4WD configurations.
John Deere 5225 Horsepower, Weight, and Specifications:
General Information
What is the general information for the John Deere 5225?
- Model: John Deere 5225
- Years of Production: 2005 to 2008
- Series: 5025 Series
- Type: Utility tractor
- Factory Location: Augusta, Georgia, USA
Horsepower
What is the horsepower of the John Deere 5225?
- Engine (gross): 56 hp / 41.8 kW
- PTO (claimed): 45 hp / 33.6 kW
- PTO (tested): 47.59 hp / 35.5 kW
Engine
What type of engine does the John Deere 5225 have?
- Engine: John Deere 3.1L 5-cyl diesel
Mechanical
What are the mechanical specifications of the John Deere 5225?
- Chassis: 4x2 2WD / 4x4 MFWD 4WD
- Final Drives: Inboard planetary
- Differential Lock: Mechanical rear
- Steering: Power
- Brakes: Differential hydraulic wet disc
- Cab Options: Open operator station with two-post folding ROPS, Optional isolated flat-platform (IOOS), Cab available with air-conditioning
- Transmissions: 9-speed partially synchronized, 12-speed power shuttle, 24-speed two-speed power shift
Capacity
What is the fluid capacity of the John Deere 5225?
- Fuel: 25 gal / 94.6 L (straddle), 33.5 gal / 126.8 L (IOOS/cab)
- Hydraulic System: 10.3 gal / 39.0 L (9-speed), 11.5 gal / 43.5 L (12-speed)
- Front Hubs: 0.74 qts / 0.7 L each
- Front Diff.: 4.8 qts / 4.5 L
Hydraulics
What are the hydraulics specifications of the John Deere 5225?
- Type: Open center
- Capacity: 10.3 gal / 39.0 L (9-speed), 11.5 gal / 43.5 L (12-speed)
- Pressure: 2828 psi / 195.0 bar
- Rear Valves: 1 to 3
- Mid Valves: 0, 2, or 3
- Pump Flow: 13.5 gpm / 51.1 lpm
- Total Flow: 19.4 gpm / 73.4 lpm
- Steering Flow: 5.9 gpm / 22.3 lpm
- Steering Pressure: 1957 psi / 134.9 bar
Tractor Hitch
What type of hitch does the John Deere 5225 have?
- Rear Type: II/I
- Control: Top-link draft sensing
- Rear Lift (at 24\"/610mm): 3374 lbs / 1530 kg
Power Take-off (PTO)
What are the PTO specifications of the John Deere 5225?
- Rear PTO: Independent
- Clutch: Dry disc, Electro-hydraulic wet disc (24-speed)
- Rear RPM: 540, 540/540E (Optional), 540/1000 (Optional field conversion kit)
- Engine RPM: 540@2400, 540E@1700
Dimensions & Tires
What are the dimensions and tires of the John Deere 5225?
- Wheelbase: 85.7 inches / 217 cm
- Weight: 5350 to 6580 pounds
- Front Tire: 6.50-16
- 2WD Rear Tire: 13.6-28
Electrical
What are the electrical specifications of the John Deere 5225?
- Ground: Negative
- Charging System: Alternator
- ROPS Charging Amps: 70
- Cab Charging Amps: 90
- Battery CCA: 950
- Battery Volts: 12
- Battery Group: BCI 31
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.