Winton 1.25m Tractor Stone Burier W‑SB125

Stone burying and seedbed prep for 25-30 HP compacts
Flip stones under a fresh tilth and leave a level finish ready for grass seed. The Winton W‑SB125 covers more paddock per pass than a 1.05m sibling - built for smallholders and equestrian property owners running a compact tractor on green ground.
OverviewEssential Winton W‑SB125 Stone Burier info
Machine Type Stone Burier
Tractor HP25 - 30 hp
Working Width 115 cm
Penetration Depth 12 cm
Weight 355 kg
Free PTO Shaft Included
Free Delivery Included
DescriptionWhy buy the Winton W‑SB125 Stone Burier?
The Winton W-SB125 is the wider model in the stone burier range. At 1.25m it clears more ground per pass than its narrower sibling, and it suits a paddock owner running a compact tractor at the upper end of the small-tractor bracket. One pass tills the soil, buries stones and debris underneath, and rolls the surface flat for seeding.
Built for paddocks and smallholdings
Match it to a 25–30 HP tractor on Cat 1 linkage. It tills to a maximum depth of 12 cm — deep enough to drop stones below a fresh tilth, with the lighter worked soil left sitting on top. Good for renovating tired pasture or prepping rough ground before reseeding.
Clean finish, set by you
The rear mesh roller rides over the tilled soil and levels it as you go. Its position is adjustable, so you set the finish height to suit the job. The result is an even surface ready for grass seed.
Safety and a sensible upgrade
A shear bolt PTO shaft is included as standard. If you expect to work harder ground regularly, the optional slip clutch PTO upgrade is worth a look — it saves replacing shear bolts every time the machine bites something it shouldn't.
- 1.25m working width — covers paddock-scale jobs in fewer passes
- 24 blades drive the burying and tilling action
- 12 cm maximum working depth
- Matched to 25–30 HP compact tractors with Cat 1 three-point linkage
- Adjustable rear mesh roller sets the finish height
- Shear bolt PTO shaft included; optional slip clutch PTO upgrade available
- Weighs 355 kg
SpecificationsWinton W‑SB125 Stone Burier technical details
Brand
Winton Machinery
Reference (SKU)
W‑SB125
Weight
355kg
Dimensions
150 x 145 x 90 cm
Tractor HP Required (range)
25-30HP
Working Width
115cm
Tilling Depth
12cm
Blade Type
L Blade
Number of Blades
24
Linkage Type
3 point hitch, category 1
Oil Type
Gear 80W90
PTO Shaft
Included FREE of charge
Warranty
12 months manufacturer's warranty
Tractor CompatibilityCheck tractor fit for the Winton WSB series
Compatibility is based on standard tractor specifications, such as a 540RPM clockwise PTO, Type 1 or 2 linkage, and hydraulic spools where required.
