Winton Reversible Single Furrow Plough W‑SRP25

The W-SRP25 is the plough to reach for when a full-size body simply won't fit. At 30 cm wide it slips between orchard rows and along tree lines without barking trunks or lifting saplings — work a bigger plough can't touch.

Close work along the tree line

The narrow frame is the whole point. You can run the furrow right up to the sapling without root disturbance, then reverse direction at the headland and come back the other way. Useful on tree nurseries, young orchards and tight market-garden plots.

Reinforced for heavy ground

Despite the small footprint, the short arm carries extra welded plates at the stress points. That's what lets it pull through thick clay as well as lighter sandy soils. Working depth sets between 16 and 22 cm using the gauge wheel — straightforward to dial in on shallow topsoil.

Pairs with a compact tractor

At 108 kg it's light enough for a sub-compact's rear lift, and the 3-point hitch doubles as a multi-use tool bar when the plough's off. The coulter detaches for sharpening or replacement as a wear part.

• 30 cm working width — narrow body for tree-line and inter-row work
• 16–22 cm working depth, set via gauge wheel
• Cat 1 three-point linkage, 41–56 cm lower linkage spread
• 25 HP+ tractor requirement
• Reinforced short arm with welded frame plates at stress points
• Detachable, replaceable coulter
• 2 blades, reversible operation
• 108 kg; 107 × 61 × 90 cm