New Holland TN70A Specifications
Engine Horsepower: 67 hp
Manufactured: 2004 to 2008
New Holland TN70A Summary
The New Holland TN70A utility tractor was produced from 2004 to 2008 as part of the TN-A Series. It was manufactured by New Holland in Jesi, Italy. The TN70A is equipped with an Iveco 2.9L 3-cylinder diesel engine, delivering 70 horsepower gross and 67 horsepower engine power. There are three main variants: TN70A (ROPS), TN70DA (cab), and TN70SA (SuperSteer).
New Holland TN70A Horsepower, Weight, and Specifications:
Production
Who manufactures the New Holland TN70A and where was it built?
- Manufacturer: New Holland
- Type: Utility tractor
- Built in: Jesi, Italy
Variants
What are the different variants of the New Holland TN70A?
- TN70A: ROPS
- TN70DA: Cab
- TN70SA: SuperSteer
Engine
What are the engine specifications of the New Holland TN70A?
- Engine model: Iveco 2.9L 3-cyl diesel
- Fuel tank: 23 gal (87.1 L)
Transmissions
What transmission options are available for the New Holland TN70A?
- 8-speed constant mesh with mechanical shuttle
- 12-speed partially synchronized with mechanical shuttle
- 16-speed partially synchronized with mechanical shuttle
- 16-speed partially synchronized with power shuttle
Horsepower
What is the horsepower specification of the New Holland TN70A?
- Engine (gross): 70 hp (52.2 kW)
- Engine: 67 hp (50.0 kW)
- PTO (claimed): 57 hp (42.5 kW)
- Drawbar (tested): 51.6 hp (38.5 kW)
- PTO (tested): 60.7 hp (45.3 kW)
Mechanical
What are the mechanical features of the New Holland TN70A?
- Drive: 4x2 2WD, 4x4 MFWD 4WD (optional)
- Steering: Hydrostatic power
- Brakes: Differential wet disc brakes
- ROPS: Canopy optional
Hydraulics
What are the hydraulic specifications of the New Holland TN70A?
- Type: Open center
- Pressure: 2755 psi (190.0 bar)
- Valves: 1 to 4
- Pump flow: 12.8 gpm (48.4 lpm), 16.9 gpm (optional) (64.0 lpm)
- Steering flow: 7.4 gpm (28.0 lpm), 9.4 gpm (with power shuttle) (35.6 lpm)
Tractor Hitch
What are the hitch specifications of the New Holland TN70A?
- Rear Type: II/I
- Rear lift (at 24"/610mm): 3,960 lbs (1796 kg)
Power Take-off (PTO)
What are the PTO specifications of the New Holland TN70A?
- Rear PTO: Independent
- Rear RPM: 540
Dimensions & Tires
What are the dimensions and tire specifications of the New Holland TN70A?
- Wheelbase: 81.5 inches (2WD) (207 cm), 78.9 inches (4WD) (200 cm)
- Weight: 5020 to 5975 pounds
Electrical
What are the electrical specifications of the New Holland TN70A?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 65
- Battery CCA: 730
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.