John Deere 7260R Specifications
Engine Horsepower: 260 hp
Manufactured: 2011 to 2013
John Deere 7260R Summary
The John Deere 7260R is a row-crop tractor produced from 2011 to 2013 as part of the 7R Series. It is manufactured by John Deere in Waterloo, Iowa, USA. The tractor has a gross engine power of 260 hp, with a maximum engine power of 286 hp. The PTO claimed power is 215 hp, while the tested PTO power is 256.63 hp. The tested drawbar power is 185.30 hp. There are no noted variants.
John Deere 7260R Horsepower, Weight, and Specifications:
Production
Who manufactures this tractor and where?
- Manufacturer: John Deere
- Type: Row-Crop tractor
- Factory: Waterloo, Iowa, USA
Horsepower
What are the horsepower specifications of the tractor?
- Engine (gross): 260 hp (193.9 kW)
- Engine (max): 286 hp (213.3 kW)
- PTO (claimed): 215 hp (160.3 kW)
- Drawbar (tested): 185.30 hp (138.2 kW)
- PTO (tested): 256.63 hp (191.4 kW)
Engine
What are the engine specifications?
- Engine type: John Deere 9.0L 6-cyl diesel
- Fuel tank: 138 gal (522.3 L); 144 gal (545.0 L) (optional)
Mechanical
What are the mechanical features of the tractor?
- Chassis: 4x4 MFWD 4WD
- Differential lock: Full-locking electrohydraulic rear. Limited slip front axle. Electrohydraulic on TLS Plus front axle with front brakes.
- Steering: Hydrostatic power (ActiveCommand Steering optional)
- Cab: CommandView II Cab. AutoTrac ready. ISO 1178.3 ISOBUS connection. JDLink and Service ADVISOR Remote available.
- Transmission: Infinitely variable transmission
Hydraulics
What are the hydraulic specifications?
- Type: Closed-center pressure and flow compensated (PFC)
- Pressure: 2958 psi (204.0 bar)
- Rear valves: 6 (max)
- Mid valves: 0 to 2
- Pump flow: 43 gpm (162.8 lpm); 59 gpm (223.3 lpm) (optional)
- SCV flow: 35 gpm (132.5 lpm)
Tractor Hitch
What are the hitch specifications?
- Rear Type: 3/3N
- Control: Electrohydraulic sensing
- Rear lift: 15,200 lbs (6894 kg); 17,300 lbs (7847 kg) (optional)
- Front Hitch: 3N (optional)
- Front lift: 11,464 lbs (5200 kg)
- Drawbar: Category 3 drawbar standard with 4,050 to 6,000 pound rating. High-capacity 10,000 Cat. 3 drawbar optional.
Power Take-off (PTO)
What are the PTO specifications?
- Rear PTO: Independent
- Rear RPM: 1000 (1.75); 540/1000 (1.375/1.75); 540/540E/1000 (1.375/1.75); 540/540E/1000/1000E (1.375/1.75)
- Engine RPM: 540@1950; 540E@1750; 1000@1950; 1000E@1950
- Front PTO: Optional
- Front RPM: 1000 (1.375); 1000 (1.75)
Dimensions & Tires
What are the dimensions and tire specifications?
- Wheelbase: 115.2 inches (292 cm)
- Weight: 27,180 lbs (12328 kg)
Electrical
What are the electrical specifications?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 200
- Batteries: 2
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.