About the John Deere 4030
Engine Horsepower: 88 hp
Manufactured: 1973 to 1977
John Deere 4030 Summary
John Deere 4030, produced from 1973 to 1977, is part of the Generation II Series of row-crop tractors. Manufactured in Waterloo, Iowa, USA, a total of 15,690 units were built. The tractor offers 80 hp PTO claimed, with 67.03 hp drawbar tested and 80.33 hp PTO tested. It is available with either a 5.4L 6-cylinder diesel engine or a 5.0L 6-cylinder gasoline engine.
John Deere 4030 Horsepower, Weight, and Specifications:
General Information
When was the John Deere 4030 manufactured, and what type of tractor is it?
- Manufacturing Years: 1973 to 1977
- Series: Generation II
- Type: Row-Crop
Production
Who manufactured the John Deere 4030, and where?
- Manufacturer: John Deere
- Factory Location: Waterloo, Iowa, USA
- Total Built: 15,690 units (222 gasoline)
- Original Price (1977): $17,721
Horsepower
What are the horsepower ratings for the John Deere 4030?
- PTO (claimed): 80 hp (59.7 kW)
- Drawbar (tested): 67.03 hp (50.0 kW)
- PTO (tested): 80.33 hp (59.9 kW)
Engines
What engine options are available for the John Deere 4030?
- 5.4L 6-cylinder diesel
- 5.0L 6-cylinder gasoline
Mechanical
What are the mechanical specifications of the John Deere 4030?
- Chassis: 4x2 2WD
- Final Drives: Planetary
- Differential Lock: Hydro-mechanical rear (optional)
- Steering: Power
- Brakes: Differential hydraulic wet disc
- Cab Options: Open operator station, four-post Roll-Gard ROPS, Sound-Gard cab with heat and air-conditioning
- Transmissions: 8-speed partially synchronized; 16-speed partial power shift; 13-speed creeper
Capacity
What is the fuel and hydraulic capacity of the John Deere 4030?
- Fuel: 35 gal (132.5 L)
- Hydraulic System: 13 gal (49.2 L)
Hydraulics
What are the hydraulic specifications of the John Deere 4030?
- Type: Closed center
- Capacity: 13 gal (49.2 L)
- Valves: 1 to 3
- Pump Flow: 23 gpm (87.1 lpm)
Tractor Hitch
What type of rear hitch does the John Deere 4030 have?
- Rear Type: II
Power Take-off (PTO)
What are the PTO specifications for the John Deere 4030?
- Rear PTO: Independent
- Rear RPM: 540/1000 (1.375)
Dimensions & Tires
What are the dimensions and tire sizes of the John Deere 4030?
- Wheelbase: 101 inches (256 cm)
- Weight: 7340 to 9180 pounds
- Front Tire: 6.00-16
- Rear Tire: 15.5-38
Electrical
What are the electrical specifications for the John Deere 4030?
- Ground: Negative
- Charging System: Alternator
- Batteries: 2
- Battery Volts: 6
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.