Winton 500kg Adjustable Pallet Fork W‑PF500A

The W-PF500A is the adjustable-arm version of Winton's 500 kg pallet fork. Slide the tines anywhere from 23 cm to 53 cm apart and the same frame takes a Euro pallet, a stack of small bales or a load that doesn't sit cleanly on either. Scaled to what a Cat 1 compact can lift.

Why the adjustable spacing matters

A fixed-width fork only suits one job. Reset the arms to 23 cm for narrow bale stacks, open them out to 53 cm for builder's pallets and IBCs, and you cover most of what crosses the yard in a week — without owning two forks.

Matched to a 14–35 HP compact

500 kg is what a small tractor can realistically lift without lightening the back end. Load spreads across 3 points on the frame, which keeps stress off any single weld when you're working near the top of that capacity.

Low-fuss in daily use

Solid steel tines with tapered tips slide under pallets and bales cleanly. Beyond the arm adjustment there are no moving parts to grease or service through the season.

• Tine spacing adjustable from 23 cm to 53 cm between arms
• Lift capacity 500 kg, matched to a 14–35 HP tractor
• Cat 1 three-point linkage, fitted with 3 pins for quick hitching
• Load distributed across 3 points on the frame to reduce stress failure
• Solid steel tines with tapered tips for clean entry under pallets and bales
• No moving parts beyond the arm adjustment — minimal maintenance