New Holland T9.480 Specifications
Engine Horsepower: 420 hp
Manufactured: 2014 to 2023
New Holland T9.480 Summary
The New Holland T9.480, produced from 2014 to 2023, is a four-wheel drive tractor in the T9 Series built in Fargo, North Dakota, USA. It features an FPT 12.9L 6-cyl diesel engine with a gross horsepower of 420 hp and a maximum of 462 hp. The CaseIH Steiger 420 is a similar variant.
New Holland T9.480 Horsepower, Weight, and Specifications:
Production
Who manufactures the New Holland T9.480 and where is it built?
- Manufacturer: New Holland (a part of CNH)
- Type: Four-wheel Drive (4WD) tractor
- Built in: Fargo, North Dakota, USA
Variants
What is the similar model to the New Holland T9.480?
- Similar model: Steiger 420 (CaseIH)
Engine
What are the specifications of the New Holland T9.480's engine?
- Engine type: FPT 12.9L 6-cyl diesel
- Fuel tank capacity: 230 gal (870.6 L)
- Exhaust fluid (DEF) capacity: 42 gal (159.0 L)
Transmission
What type of transmission does the New Holland T9.480 have?
- Transmission type: 17-speed full power shift
Horsepower
What is the horsepower output of the New Holland T9.480?
- Engine (gross): 420 hp (313.2 kW)
- Engine (max): 462 hp (344.5 kW)
- PTO (claimed): 355 hp (264.7 kW)
- Drawbar (tested): 340.86 hp (254.2 kW)
- PTO (tested): 413.44 hp (308.3 kW)
Mechanical
What mechanical features are present in the New Holland T9.480?
- Drive type: Four-wheel drive
- Steering: hydrostatic power articulated
- Brakes: Wet disc brakes
- Trailer brakes: Hydraulic (optional)
- Cab: Standard with air-conditioning; Optional Comfort Ride cab suspension; ISOBUS compliant; Intelliview IV; IntelliSteer
Hydraulics
What are the hydraulic system features of the New Holland T9.480?
- Type: Closed center load sensing (CCLS)
- Valves: 4 to 8
- Standard pump flow: 42 gpm (159.0 lpm)
- High-Flow pump flow: 57 gpm (215.7 lpm)
- MegaFlow pump flow: 113 gpm (427.7 lpm)
Tractor Hitch
What are the tractor hitch specifications for the New Holland T9.480?
- Rear type: IVN (optional); IIIN (optional)
- Control: Position control
- Rear lift (at 24"/610mm): 20,000 lbs (9,072 kg)
- Rear arms: Adjustable link ends
- Drawbar: Cat. 4
Power Take-off (PTO)
What are the PTO specifications for the New Holland T9.480?
- Rear PTO: Independent
- Rear PTO type: 1000 (1.75)
- Engine RPM: 1000@1998 (early); 1000@1811 (late)
Dimensions & Tires
What are the dimensions and tire specifications for the New Holland T9.480?
- Wheelbase: 148 inches (375 cm)
- Weight: 36,048 lbs (16,351 kg)
- Front tire: 710/70
- Rear tire: 710/70
Electrical
What are the electrical system specifications for the New Holland T9.480?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 200
- Batteries: 2
- Battery CCA: 1000
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
