Finishing cuts on sports turf for 20-45 HP compacts
Get a close, even finish on already-maintained turf without overreaching the PTO. The Winton W‑FM150 sits in the middle of the W-FM finishing mower range, running on a compact tractor - built for groundskeepers on sports fields, school grounds and camp site lawns.
OverviewEssential Winton W‑FM150 Finishing Mower info
Mower Type Finishing Mower
Tractor HP20 - 45 hp
Mower Position No Offset
Cutting Width 150 cm
Cutting Height20 - 80 mm
Weight 187 kg
Free PTO Shaft Included
Free Delivery Included
DescriptionWhy buy the Winton W‑FM150 Finishing Mower?
The W-FM150 is the middle deck in Winton's three-size finishing mower line-up. At 1.5m it covers ground noticeably faster than the smaller deck, but doesn't ask as much of the tractor as the larger one. For most 20-45 HP compact tractors working sports fields, cricket outfields and larger amenity lawns, it's the sweet spot.
Built for maintained turf
This is a finishing mower in the strict sense — level, regularly cut grass only. The 3-blade rotary deck works like an oversized lawn mower, and the rear discharge spreads clippings evenly across the cut rather than dropping them in a windrow. Belt drive (2 drive belts) powers the blades.
Cut height and ground following
4 height-adjustable wheels set the cut anywhere from 3.5 cm for a tight lawn finish up to 8 cm for longer amenity turf. The floating linkage lets the deck ride contours and gradients, while lower link-arm extensions keep the mower clear of the tractor's rear wheels.
- 1.5m working width matched to a 20-45 HP tractor range
- Cutting height 3.5-8 cm via 4 adjustable wheels
- 3 blades, rotary action, PTO-driven through 2 belts
- Rear discharge for even clipping dispersal
- Floating linkage follows ground contours and gradients
- Lower link-arm extensions prevent tractor wheel fouling
- Cat 1 linkage, 187 kg, simple-access grease points
- Optional W-FM150 roller upgrade available for a striped finish
SpecificationsWinton W‑FM150 Finishing Mower technical details
Brand
Winton Machinery
Reference (SKU)
W‑FM150
Weight
187kg
Dimensions
160 x 140 x 75 cm
Tractor HP Required (range)
20-45HP
Cutting Heights
150cm
Linkage Type
Category 1
Lower Linkage Width
50-70cm
Number of Blades
3
Oil Type
Gear Oil 80W90
Deck thickness
4mm
PTO Shaft
Included FREE of charge
Optional Upgrades
Rear Roller available as an optional extra
Warranty
12 months manufacturer's warranty
Tractor CompatibilityCheck tractor fit for the Winton WFM series
Compatibility is based on standard tractor specifications, such as a 540RPM clockwise PTO, Type 1 or 2 linkage, and hydraulic spools where required.
ReviewsVerified Winton W‑FM150 Finishing Mower reviews
3 reviews for the Winton W‑FM150 Finishing Mower
20 reviews for all WFM Finishing Mower models
Review Your Winton W‑FM150
The machine does everything we wanted it to do
The machine does everything we wanted it to do we have 5 acres of grass land and with the roller attachment it looks great Many thanks with your prompt delivery as well
Excellent
Very happy with my purchase
Used for three years behind a TEA20 Grey Fergie. ( but used an overrun clutch on the live pto) Had no issues, cuts well, tends to row up the clippings if grass is long but I just run over it all again to mulch it. Very happy with my purchase.
The mower has been great. Many thanks to you all.
Purchased the Winton WFM120 in June 2024 and it is a good piece of kit, its been given a lot of use over the last 18 months and has proven to be very reliable
This is a fabulous piece of equipment
I bought the machine to replace a flail collector that, although did a reasonable job, was way too heavy for the lawned finish that I was aiming for. I also bought the rear roller attachment that helped prevent the castor wheels doing any damage and the finish now is excellent. If I was being picky, I think that the blade alignment could be better as one of the blades cuts shorter than the other two but nothing major. I'd also like the ability to add a second roller to the front of the mower but understand that may not be ideal for everyone. All in all, I'm very pleased with the performance and considering the price point, this is a fabulous piece of equipment.
I would buy another one if I needed
The machine has worked well overall. Used it with the extension arms up until October 23 when the lower one snapped in two. Read the book and found it could run without them and it missed our tyres. The fingers on the back are all bent as operator reverses under bushes with it down and they get caught on the ground. Apart from these things I would buy another one if I needed. 4/5 just for the snapped arm.
Hi Nigel, thank you for the detailed feedback. I'm glad you're getting on well even after removing the extension arms - I've contacted you via email to help rectify the broken extension. It's best practice to raise the machine off the ground when reversing, but I understand why this hasn't been done when under bushes. An easy way to straighten the rear grass-dispersing 'fingers' is to close an adjustable spanner over the steel and make a firm but careful adjustment.
Very pleased with this mower. It manages long grass well and copes with a faster ground speed than I was expecting. All in all very impressed.
Great machine, would recommend this bit of kit to eveyone
Great machine, would recommend this bit of kit to eveyone
Very good very quick
Its use results in a good smooth cut
Generally I am happy with my Winton WFM120 1.2m PTO Finishing Mower. Its use results in a good smooth cut although it does not throw out the mown grass as well as I would like but this may be due to the contours of my garden. It is a good width allowing 2 people to comfortably walk side by side yet doesn't waste valuable planting space. I do struggle manhandling (girlhandling) it a bit when attaching it to my tractor linkage, I think this is due to the arm of the mower being solid with no movement and quite close to the wheels although I assume this is restricted by the width of the machine I use. On the whole I would give it a 4 out of 5.
I am very pleased with my Winton Mower
I am very pleased with my Winton Mower— it does the job I have for it. So that’s a plus. And yes, if someone has a similar use for it I would certainly suggest they get one.
FAQsWinton W‑FM150 Finishing Mower help & questions
If your questions is not here, please contact us.