Massey Ferguson 4800 Specifications
Engine Horsepower: 225 hp
Manufactured: 1978 to 1983
Massey Ferguson 4800 Summary
The Massey Ferguson 4800 was produced from 1978 to 1983 as part of the 4000 4WD Series. This four-wheel drive tractor features a Cummins 14.8L 8-cylinder diesel engine with a net horsepower of 225 hp. Claimed power ratings are 150 hp at the drawbar and 179 hp at the PTO, with tested values of 153.78 hp at the drawbar and 179.31 hp at the PTO.
Massey Ferguson 4800 Horsepower, Weight, and Specifications:
Production
Who manufactured the Massey Ferguson 4800 and what type of tractor is it?
- Manufacturer: Massey Ferguson
- Type: Four-wheel Drive (4WD) tractor
- Original price: $87,000 (1983)
Horsepower
What is the horsepower specification of the Massey Ferguson 4800?
- Engine (net): 225 hp / 167.8 kW
- Drawbar (claimed): 150 hp / 111.9 kW
- PTO (claimed): 179 hp / 133.5 kW
- Drawbar (tested): 153.78 hp / 114.7 kW
- PTO (tested): 179.31 hp / 133.7 kW
Engine
What type of engine does the Massey Ferguson 4800 have?
- Type: Cummins 14.8L 8-cyl diesel
Mechanical
What are the mechanical specifications of the Massey Ferguson 4800?
- Chassis: 4x4 articulated 4WD
- Steering: articulated power
- Brakes: hydraulic caliper
- Cab: Cab standard with heat and air-conditioning. Optional AM/FM 8-track stereo.
- Transmission: 18-speed partial power shift
Capacity
What are the capacity specifications of the Massey Ferguson 4800?
- Fuel: 190 gal / 719.1 L
- Steering: 96 qts / 90.9 L
- Front axle: 42 qts / 39.7 L
- Rear axle: 84 qts / 79.5 L
Hydraulics
What are the hydraulic specifications of the Massey Ferguson 4800?
- Type: open center
- Valves: 3 to 4
- Pump flow (transmission): 16 gpm / 60.6 lpm
- Pump flow (lift): 16 gpm / 60.6 lpm
- Pump flow (auxiliary): 28 gpm / 106.0 lpm
- Total flow: 60 gpm / 227.1 lpm
- Steering capacity: 96 qts / 90.9 L
Tractor Hitch
What are the hitch specifications of the Massey Ferguson 4800?
- Rear Type: IV
- Control: position control with electronic lower link sensing
- Rear lift (at 24"/610mm): 11000 lbs / 4989 kg
Power Take-off (PTO)
What are the PTO specifications of the Massey Ferguson 4800?
- Rear PTO: independent
- Rear RPM: 1000 (1.75)
- Engine RPM: 1000@2350
Dimensions & Tires
What are the dimensions and tire specifications of the Massey Ferguson 4800?
- Wheelbase: 137 inches / 347 cm
- Weight: 27000 to 30200 pounds
- Front tire: 23.1-34
- Rear tire: 23.1-34
Electrical
What are the electrical specifications of the Massey Ferguson 4800?
- Ground: negative
- Charging system: alternator
- Charging amps: 60
- Batteries: 4
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.