John Deere 9510R Specifications
Engine Horsepower: 510 hp
Manufactured: 2012 to 2014
John Deere 9510R Summary
The John Deere 9510R is a four-wheel-drive tractor produced from 2012 to 2014 as part of the 9R/RT Series, manufactured in Waterloo, Iowa, USA. It features a gross engine power of 510 hp and a maximum of 561 hp. The 9510R variant is 4WD, while the 9510RT is a crawler.
John Deere 9510R Horsepower, Weight, and Specifications:
Production
Who manufactures the John Deere 9510R?
- Manufacturer: John Deere
- Type: Four-wheel Drive (4WD) tractor
- Factory: Waterloo, Iowa, USA
- Original price: $381,687 (2014)
Variants
What are the variants of the John Deere 9510R?
- 9510R: 4WD
- 9510RT: Crawler
Horsepower
What is the horsepower of the John Deere 9510R?
- Engine (gross): 510 hp / 380.3 kW
- Engine (max): 561 hp / 418.3 kW
- PTO (claimed): 319 hp / 237.9 kW
- Drawbar (tested): 410.97 hp / 306.5 kW
- PTO (tested): 368.33 hp / 274.7 kW
Engine
What engine does the John Deere 9510R have?
- Engine: John Deere 13.5L 6-cyl diesel
- Fuel tank: 350 gal / 1324.8 L
Mechanical
What are the mechanical features of the John Deere 9510R?
- Chassis: 4x4 articulated 4WD
- Final drives: Inboard planetary with double-reduction axle
- Differential lock: Fully-locking electro-hydraulic
- Steering: Hydraulic power
- Brakes: Hydraulic wet disc
- Trailer brakes: Hydraulic optional
- Cab: CommandView II cab standard with air-conditioning
- Transmission: 18-speed full power shift
Hydraulics
What are the hydraulic characteristics of the John Deere 9510R?
- Type: Closed center pressure flow compensated
- Pressure: 2900 psi / 200.0 bar
- Valves: 4 to 6
- Pump flow: 48 gpm / 181.7 lpm; 78 gpm / 295.2 lpm (High-Flow)
- SCV flow: 37 gpm / 140.0 lpm; 45 gpm / 170.3 lpm (19.1mm SCV)
Tractor Hitch
What are the hitch specifications for the John Deere 9510R?
- Rear Type: 4N/4
- Control: Electronic draft sensing
- Rear lift: 15,300 lbs / 6940 kg; 20,000 lbs / 9072 kg (optional)
- Drawbar: Category 5 standard heavy-duty support and 5,440 kg (12,000 pound) load rating
Power Take-off (PTO)
What are the PTO specifications for the John Deere 9510R?
- Rear PTO: Independent (optional)
- Rear RPM: 1000 (1.75)
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 9510R?
- Wheelbase: 137.8 inches / 350 cm
- Weight: 41540 to 44255 pounds
- Front tire: 710/70R42
- Rear tire: 710/70R42
Electrical
What are the electrical specifications of the John Deere 9510R?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 200
- Charging volts: 12
- Batteries: 3
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
