John Deere 9460RT Specifications
Engine Horsepower: 460 hp
Manufactured: 2012 to 2014
John Deere 9460RT Summary
The John Deere 9460RT is an agricultural crawler tractor produced from 2012 to 2014 as part of the 9R/RT Series. It features a 460 hp gross engine and was built in Waterloo, Iowa, USA. Variants include the 9460R (4WD) and 9460RT (crawler).
John Deere 9460RT Horsepower, Weight, and Specifications:
Model Information
What is the model and production year of this tractor?
- Model: John Deere 9460RT
- Years: 2012 to 2014
- Series: 9R/RT Series
- Type: Agricultural Crawler tractor
Production Details
Who manufactures this tractor and where?
- Manufacturer: John Deere
- Built in: Waterloo, Iowa, USA
- Original price: $401,154 in 2014
Variants
What are the available variants of this model?
- 9460R: 4WD
- 9460RT: Crawler
Engine
What type of engine does this tractor have?
- Engine: John Deere 13.5L 6-cyl diesel
- Fuel tank capacity: 340 gal (1286.9 L)
Transmission
What kind of transmission is used in this tractor?
- 18-speed full power shift
Horsepower
What horsepower ratings does this tractor have?
- Engine (gross): 460 hp (343.0 kW)
- Engine (net): 442 hp (329.6 kW)
- PTO (claimed): 319 hp (237.9 kW)
- Drawbar (tested): 353.03 hp (263.3 kW)
- PTO (tested): 359.80 hp (268.3 kW)
Mechanical
What are the mechanical specifications of this tractor?
- Drive: Crawler
- Final drives: Outboard planetary
- Steering: Hydrostatic power differential
- Brakes: Hydraulic wet disc
- Cab: CommandView II cab with air-conditioning (standard)
Hydraulics
What type of hydraulic system does this tractor use?
- Type: Closed center pressure flow compensated
- Pressure: 2900 psi (200.0 bar)
- Valves: 4 to 6
- Pump flow: 48 gpm (181.7 lpm); 78 gpm (High-Flow) (295.2 lpm)
- SCV flow: 37 gpm (140.0 lpm); 45 gpm (19.1mm SCV) (170.3 lpm)
Tractor Hitch
What type of hitch does this tractor have?
- Rear Type: 4N/3, 4N/4
- Control: Electronic draft sensing
- Rear lift: 15,300 lbs (6940 kg); 20,000 lbs (optional) (9072 kg)
- Drawbar:
- Category 4 standard with heavy-duty support
- Optional Cat. 4 reinforcement to 4,581 kg (wide swing) or 4,900 kg
- Optional Category 5 drawbar rated to 4,581 kg (wide swing) or 5,440 kg (2,470 kg)
Power Take-off (PTO)
What are the PTO specifications?
- Rear PTO: Independent (optional)
- Rear RPM: 1000 (1.75)
Dimensions & Tracks
What are the dimensions and track specifications?
- Wheelbase: 116 inches (294 cm)
- Weight: 44910 to 46845 pounds
- 30-inch tracks
Electrical
What is the electrical system used in this tractor?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 200
- Batteries: 3
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
