John Deere 9400 Specifications

John Deere Logo

Engine Horsepower: 425 hp

Manufactured: 1997 to 2001

John Deere 9400 Summary

The John Deere 9400 tractor was produced from 1997 to 2001. It is part of the 9000 Series and features a powerful 425 hp engine. Manufactured in Waterloo, Iowa, the 9400 is available in two variants: the wheeled 9400 and the crawler 9400T.

Tractor Icon

John Deere 9400 Horsepower, Weight, and Specifications:

Production

Who manufactured the John Deere 9400 and where?

  • Manufacturer: John Deere
  • Type: Four-wheel Drive (4WD) tractor
  • Built in: Waterloo, Iowa, USA
  • Original price: $121,000 (2001)

Variants

What are the variants of the John Deere 9400?

  • 9400: Wheeled tractor
  • 9400T: Crawler

Engine

What engine does the John Deere 9400 use?

  • Model: John Deere 12.5L 6-cyl diesel

Transmissions

What transmission options are available for the John Deere 9400?

  • 12-speed: Partially synchronized
  • 24-speed: Partial power shift
  • 12-speed: Full power shift

Horsepower

What is the horsepower of the John Deere 9400?

  • Engine: 425 hp / 316.9 kW
  • PTO (claimed): 302 hp / 225.2 kW
  • Drawbar (tested): 345.00 hp / 257.3 kW
  • PTO (tested): 312.25 hp / 232.8 kW

Mechanical

What are the mechanical features of the John Deere 9400?

  • Drive: Four-wheel drive
  • Steering: Hydrostatic power
  • Brakes: Hydraulic wet disc
  • Cab: Standard

Capacity

What are the fuel and hydraulic capacities of the John Deere 9400?

  • Fuel: 256 gal / 969.0 L
  • Hydraulic system: 26 gal / 98.4 L

Hydraulics

What are the hydraulic specifications of the John Deere 9400?

  • Type: Closed center PFC
  • Capacity: 26 gal / 98.4 L
  • Pressure: 2900 psi / 200.0 bar
  • Valves: 2 to 5
  • Pump flow: 35 gpm / 132.5 lpm
  • Total flow: 44 gpm / 166.5 lpm

Tractor Hitch

What hitch options are available for the John Deere 9400?

  • Rear Type: III; IV / IVN Optional
  • Rear lift: 13,871 lbs / 6291 kg; 14,445 lbs / 6552 kg (Cat IV)

Power Take-off (PTO)

What are the PTO specifications for the John Deere 9400?

  • Rear PTO: Independent
  • Rear RPM: 1000 Optional

Dimensions & Tires

What are the dimensions and tire specifications for the John Deere 9400?

  • Wheelbase: 137.8 inches / 350 cm
  • Weight: 33,770 to 37,410 pounds
  • Front tire: 710/70R38
  • Rear tire: 710/70R38

Electrical

What are the electrical specifications for the John Deere 9400?

  • Ground: Negative
  • Charging system: Alternator
  • Charging amps: 140
  • Batteries: 3
  • Battery CCA: 925
  • Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.