John Deere 9120 Specifications

John Deere Logo

Engine Horsepower: 280 hp

Manufactured: 2002 to 2007

John Deere 9120 Summary

The John Deere 9120 is a four-wheel-drive tractor produced from 2002 to 2007, manufactured by John Deere in Waterloo, Iowa. It belongs to the 9020 Series and is equipped with a 280 hp engine. It has several power metrics including a claimed PTO of 230 hp and a tested drawbar power of 226.02 hp. Variants include a 24-speed partial power shift and an 18-speed full power shift transmission.

Tractor Icon

John Deere 9120 Horsepower, Weight, and Specifications:

Production

Who manufactures the John Deere 9120 tractor and where?

  • Manufacturer: John Deere
  • Type: Four-wheel Drive (4WD) tractor
  • Factory: Waterloo, Iowa, USA

Horsepower

What is the horsepower of the John Deere 9120 tractor?

  • Engine: 280 hp (208.8 kW)
  • PTO (claimed): 230 hp (171.5 kW)
  • Drawbar (tested): 226.02 hp (168.5 kW)
  • PTO (tested): 244.57 hp (182.4 kW)

Engine

What type of engine does the John Deere 9120 have?

  • Engine Type: John Deere 8.1L 6-cyl diesel

Mechanical

What are the mechanical features of the John Deere 9120?

  • Chassis: 4x4 articulated 4WD
  • Steering: hydrostatic articulated
  • Brakes: hydraulic wet disc
  • Cab: CommandView cab standard with air-conditioning
  • Transmissions: 24-speed partial power shift, 18-speed full power shift

Capacity

What are the fuel and hydraulic system capacities of the John Deere 9120?

  • Fuel: 270 gal (1022.0 L)
  • Hydraulic system: 27 gal (102.2 L), 28 gal (106.0 L with 3pt)

Hydraulics

What are the hydraulic specifications of the John Deere 9120?

  • Type: closed center pressure/flow compensated
  • Capacity: 27 gal (102.2 L), 28 gal (106.0 L with 3pt)
  • Pressure: 2900 psi (200.0 bar)
  • Valves: 4 or 5
  • Pump flow: 30 gpm (113.6 lpm)
  • Total flow: 44 gpm (166.5 lpm), 48 gpm (181.7 lpm, Powershift)

Tractor Hitch

What are the hitch specifications of the John Deere 9120?

  • Rear Type: III, IV/IVN
  • Rear lift: 13,871 lbs (6291 kg), 14,445 lbs (6552 kg, optional)

Power Take-off (PTO)

What are the PTO specifications of the John Deere 9120?

  • Rear PTO: independent
  • Rear RPM: 1000

Dimensions & Tires

What are the dimensions and tire specifications of the John Deere 9120?

  • Wheelbase: 137.8 inches (350 cm)
  • Weight: 30,970 to 35,375 pounds
  • Front tire: 20.8R42
  • Rear tire: 20.8R42

Electrical

What are the electrical specifications of the John Deere 9120?

  • Ground: negative
  • Charging system: alternator
  • Charging amps: 140
  • Batteries: 2
  • Battery CCA: 925
  • Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.