John Deere 8295R Specifications
Engine Horsepower: 295 hp
Manufactured: 2014 to 2019
John Deere 8295R Summary
The John Deere 8295R was produced from 2014 to 2019 as part of the 8R Series of row-crop tractors. It has a gross engine horsepower of 295 hp, with a maximum of 324 hp and a PTO-tested horsepower of 292.97 hp. The tractor was manufactured in Waterloo, Iowa, USA.
John Deere 8295R Horsepower, Weight, and Specifications:
Production
Where and by whom is the John Deere 8295R manufactured?
- Manufacturer: John Deere
- Type: Row-Crop tractor
- Factory: Waterloo, Iowa, USA
Horsepower
What are the horsepower ratings of the John Deere 8295R?
- Engine (gross): 295 hp / 220.0 kW
- Engine (max): 324 hp / 241.6 kW
- PTO (claimed): 247 hp / 184.2 kW
- PTO (claimed front): 150 hp / 111.9 kW
- Drawbar (tested): 238.33 hp / 177.7 kW
- PTO (tested): 292.97 hp / 218.5 kW
Engine
What type of engine does the John Deere 8295R have?
- Engine Type: John Deere 9.0L 6-cyl diesel
Mechanical
What are the mechanical features of the John Deere 8295R?
- Chassis: 4x4 MFWD 4WD
- Final drives: Inboard planetary
- Differential lock: Hydraulic rear standard, hydraulic front with 1500 and ILS axles
- Steering: Hydrostatic power, Active Command steering optional
- Brakes: Hydraulic wet disc
- Trailer brakes: Hydraulic (optional), dual line air (optional)
- Cab: CommandView III cab with air-conditioning, AutoTrac ready, JDLink, ServiceADVISOR Remote
- Transmissions: 16-speed full power shift, infinitely variable transmission (IVT)
Capacity
What are the fluid capacities of the John Deere 8295R?
- Fuel: 170.4 gal / 645.0 L; 181.2 gal / 685.8 L (G49 chassis)
- Exhaust fluid (DEF): 6.8 gal / 25.7 L
- Hydraulic system: 10.6 gal / 40.1 L; 23.8 gal / 90.1 L (optional)
Hydraulics
What are the hydraulic specifications of the John Deere 8295R?
- Type: Closed-center load sensing pressure flow compensated
- Capacity: 10.6 gal / 40.1 L; 23.8 gal / 90.1 L (optional)
- Rear valves: 4 to 6
- Front valves: 0 to 2
- Pump flow: 60 gpm / 227.1 lpm; 85 gpm / 321.7 lpm (optional)
- SCV flow: 35 gpm / 132.5 lpm; 42 gpm / 159.0 lpm (optional)
Tractor Hitch
What are the hitch specifications of the John Deere 8295R?
- Rear Type: III/IIIN, IVN/III
- Rear lift: 14000 lbs / 6350 kg; 18500 lbs / 8391 kg (optional); 20000 lbs / 9072 kg (IVN)
- Rear Arms: Hydraulic center link optional
- Front Hitch: Optional
- Front lift (at ends): 11450 lbs / 5193 kg
- Drawbar: Cat 3, Cat 4 optional, Cat 4 Heavy-Duty optional
Power Take-off (PTO)
What are the PTO specifications of the John Deere 8295R?
- Rear PTO: Independent
- Rear RPM: 1000 (1.75); 1000/1000E (1.75 optional); 540/1000 (1.375 optional)
- Front PTO: Optional independent
- Front RPM: 1000 (1.75); 1000 (1.375)
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 8295R?
- Wheelbase: 121.3 inches / 308 cm (1300); 120.1 inches / 305 cm (1500/ILS)
- Weight: 27553 to 32691 pounds
- Front tire: 380/80R38
- Rear tire: 480/80R50
Electrical
What are the electrical specifications of the John Deere 8295R?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 240
- Batteries: 2
- Battery CCA: 925 (each)
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
