John Deere 8285R Specifications
Engine Horsepower: 285 hp
Manufactured: 2011 to 2013
John Deere 8285R Summary
John Deere 8285R was produced from 2011 to 2013 as part of the 8R Series. It is a row-crop tractor manufactured in Waterloo, Iowa, USA. The tractor has a gross engine power of 285 hp and a maximum engine power of 314 hp. Variants include increased lift capacity for the three-point hitch in the 2012 model year.
John Deere 8285R Horsepower, Weight, and Specifications:
Production
Who manufactures the John Deere 8285R and where?
- Manufacturer: John Deere
- Type: Row-Crop tractor
- Factory: Waterloo, Iowa, USA
- Original price: $211,192 (2011)
- For the 2012 model year, the John Deere 8285R offered an increased lift capacity on the three-point hitch.
Horsepower
What is the horsepower of the John Deere 8285R?
- Engine (gross): 285 hp / 212.5 kW
- Engine (max): 314 hp / 234.1 kW
- PTO (claimed): 239 hp / 178.2 kW
- Drawbar (tested): 222.70 hp / 166.1 kW
- PTO (tested): 287.52 hp / 214.4 kW
Engine
What is the engine specification of the John Deere 8285R?
- Engine: John Deere 9.0L 6-cyl diesel
- Fuel tank: 183.6 gal / 694.9 L
Mechanical
What are the mechanical features of the John Deere 8285R?
- Chassis: 4x4 MFWD 4WD
- Differential lock: Hydraulic rear lock, front lock on 1500 and ILS front axles
- Steering: Hydrostatic power, ActiveCommand Steering (ACS) optional
- Brakes: Differential hydraulic wet disc
- Trailer brakes: Hydraulic and air optional
- Cab: CommandView II cab standard with heat and air-conditioning
- Transmissions: 16-speed full power shift, infinitely variable transmission (IVT)
Hydraulics
What are the hydraulic features of the John Deere 8285R?
- Type: Closed center pressure-flow compensated
- Pressure: 2900 psi / 200.0 bar
- Rear valves: 3 to 5
- Pump flow: 35 gpm / 132.5 lpm
- Total flow: 44 gpm / 166.5 lpm, 60 gpm / 227.1 lpm (optional)
Tractor Hitch
What are the hitch specifications for the John Deere 8285R?
- Rear Type: 3/3N, 4N/3
- Rear lift (at 24\"/610mm):
- 13,300 lbs / 6032 kg (3/3N 2011)
- 17,300 lbs / 7847 kg (3/3N 2011)
- 18,300 lbs / 8300 kg (4N/3 2011)
- 13,600 lbs / 6168 kg (3/3N 2012)
- 17,600 lbs / 7983 kg (3/3N 2012)
- 18,700 lbs / 8482 kg (4N/3 2012)
- Front Hitch: 3N/2 (optional)
- Front lift (at ends):
- 8,800 lbs / 3991 kg
- 11,450 lbs / 5193 kg
- 12,300 lbs / 5579 kg
Power Take-off (PTO)
What are the PTO specifications for the John Deere 8285R?
- Rear PTO: Independent
- Rear RPM:
- 1000 (1-3/4)
- 1000 (1-3/8 optional)
- 540 (1-3/8 optional)
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 8285R?
- Wheelbase:
- 120.1 inches / 305 cm (1300 MFWD)
- 118.9 inches / 302 cm (1500/ILS)
- Weight: 27,218 to 30,252 pounds
- Front tire: 420/90R30
- Rear tire: 480/80R46
Electrical
What are the electrical specifications of the John Deere 8285R?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 200
- Batteries: 2
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
