John Deere 8130 Specifications
Engine Horsepower: 225 hp
Manufactured: 2006 to 2009
John Deere 8130 Summary
The John Deere 8130 is a row-crop tractor produced from 2006 to 2009 as part of the 8030 Series. It offers a gross engine power of 225 hp, with a maximum of 240 hp. It was manufactured in Waterloo, Iowa, USA, and has several variants including 4x2 2WD, 4x4 MFWD 4WD, and 4x4 Independent Link Suspension (ILS) MFWD 4WD.
John Deere 8130 Horsepower, Weight, and Specifications:
General Information
What is the general information about the John Deere 8130?
- Model: John Deere 8130
- Production Years: 2006 to 2009
- Series: 8030
- Type: Row-Crop tractor
Production
Who manufactures the John Deere 8130 and where is it made?
- Manufacturer: John Deere
- Factory: Waterloo, Iowa, USA
Horsepower
What are the horsepower specifications of the John Deere 8130?
- Engine (gross): 225 hp (167.8 kW)
- Engine (max): 240 hp (179.0 kW)
- PTO (claimed): 180 hp (134.2 kW)
- Drawbar (tested): 158.05 hp (117.9 kW)
- PTO (tested): 208.27 hp (155.3 kW)
Engine
What type of engine does the John Deere 8130 have?
- Engine: John Deere 9.0L 6-cyl diesel
Mechanical
What are the mechanical features of the John Deere 8130?
- Chassis: 4x2 2WD / 4x4 MFWD 4WD / 4x4 Independent Link Suspension (ILS) MFWD 4WD
- Steering: Power
- Brakes: Wet disc
- Cab: CommandView cab standard
- Transmission: 16-speed full power shift
Capacity
What is the fuel and hydraulic capacity of the John Deere 8130?
- Fuel: 180 gal (681.3 L)
- Hydraulic system: 9.5 gal (36.0 L) / 14.5 gal (54.9 L with aux reservoir)
Hydraulics
What are the hydraulic specifications of the John Deere 8130?
- Type: Closed center PFC
- Capacity: 9.5 gal (36.0 L) / 14.5 gal (54.9 L with aux reservoir)
- Pressure: 2098 psi (144.7 bar)
- Valves: 3 to 5
- Pump flow: 31.7 gpm (120.0 lpm)
- Total flow: 44 gpm (166.5 lpm) / 60 gpm (227.1 lpm, optional)
Tractor Hitch
What are the hitch specifications of the John Deere 8130?
- Rear Type: III/IIIN / IVN/III (optional)
- Rear lift (at 24\" / 610 mm): 12400 lbs (5624 kg) / 15200 lbs (6894 kg, optional) / 17300 lbs (7847 kg, optional)
Power Take-off (PTO)
What are the PTO specifications of the John Deere 8130?
- Rear PTO: Independent
- Rear RPM: 1000 / 540/1000 (optional)
- Engine RPM: 540 @ 1817 / 1000 @ 2000
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 8130?
- Wheelbase: 118.9 inches (302 cm, ILS) / 120.1 inches (305 cm, MFWD) / 126.8 inches (322 cm, 2WD)
- Weight: 21774 to 25147 pounds
- Front tire: 11.00-24
- Rear tire: 480/80R46
Electrical
What are the electrical specifications of the John Deere 8130?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 200
- Batteries: 2
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
