John Deere 8120 Specifications
Engine Horsepower: 208 hp
Manufactured: 2002 to 2005
John Deere 8120 Summary
The John Deere 8120 was produced from 2002 to 2005 as part of the 8020 Series. This row-crop tractor was manufactured in Waterloo, Iowa, USA. It has an engine with a gross horsepower of 208 hp, a net horsepower of 200 hp, a maximum horsepower of 230 hp, and a PTO claimed horsepower of 170 hp. There are two variants: the 8120, a wheeled tractor, and the 8120T, a crawler.
John Deere 8120 Horsepower, Weight, and Specifications:
Production
What are the production details of the John Deere 8120?
- Manufacturer: John Deere
- Type: Row-Crop tractor
- Factory: Waterloo, Iowa, USA
Variants
What variants does the John Deere 8120 have?
- 8120: Wheeled tractor
- 8120T: Crawler
Horsepower
What is the horsepower of the John Deere 8120?
- Engine (gross): 208 hp (155.1 kW)
- Engine (net): 200 hp (149.1 kW)
- Engine (max): 230 hp (171.5 kW)
- PTO (claimed): 170 hp (126.8 kW)
- Drawbar (tested): 148.45 hp (110.7 kW)
- PTO (tested): 199.71 hp (148.9 kW)
Engine
What engine does the John Deere 8120 have?
- Model: John Deere 8.1L 6-cyl diesel
Mechanical
What are the mechanical features of the John Deere 8120?
- Chassis: 4x2 2WD, 4x4 MFWD 4WD
- Steering: Hydrostatic power
- Brakes: Hydraulic wet disc
- Cab: Cab standard
- Transmission: 16-speed full power shift
Capacity
What are the capacities of the John Deere 8120?
- Fuel: 135 gal (511.0 L); 160 gal (605.6 L) optional
- Hydraulic system: 37 gal (140.0 L); 39.6 gal (149.9 L) with ILS
- Front hubs: 3.6 qts (3.4 L); 4.2 qts (4.0 L) with ILS
- Front diff.: 14.2 qts (13.4 L)
Hydraulics
What are the hydraulic characteristics of the John Deere 8120?
- Type: Closed center pressure-flow compensated (PFC)
- Capacity: 37 gal (140.0 L); 39.6 gal (149.9 L) with ILS
- Pressure: 2900 psi (200.0 bar)
- Valves: 5
- SCV flow: 30 gpm (113.6 lpm)
- Total flow: 33.5 gpm (126.8 lpm) with standard 45cc pump; 42.5 gpm (160.9 lpm) with optional 57cc pump
Tractor Hitch
What are the hitch capabilities of the John Deere 8120?
- Rear Type: III, IIIN
- Rear lift: 12,300 lbs (5579 kg); 15,180 lbs (6885 kg) optional
- Front Hitch: IIIN (optional)
- Front lift: 11,000 lbs (4989 kg)
Power Take-off (PTO)
What are the PTO specifications of the John Deere 8120?
- Rear PTO: Independent
- Clutch: Hydraulic wet discs
- Rear RPM: 1000 (1.75); 540/1000 (1.375 optional)
- Engine RPM: 540@1975; 1000@2200
Dimensions & Tires
What are the dimensions and tire specifics of the John Deere 8120?
- 2WD Wheelbase: 123.6 inches (313 cm)
- 4WD Wheelbase: 116.9 inches (296 cm)
- ILS Wheelbase: 115.7 inches (293 cm); 118.9 inches (302 cm) long frame
- Weight: 19,100 to 22,450 pounds
- Front tire: 11.00-24
- Rear tire: 480/80R46
Electrical
What are the electrical specs of the John Deere 8120?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 150
- Batteries: 2
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.