John Deere 7230R Specifications
Engine Horsepower: 230 hp
Manufactured: 2011 to 2019
John Deere 7230R Summary
The John Deere 7230R is a row-crop tractor produced from 2011 to 2019. It boasts an engine with a gross horsepower of 230 hp and a maximum of 253 hp. The production took place in Waterloo, Iowa, USA. The 7230R comes in various transmission options, including a 16-speed partial power shift, 20-speed partial power shift, 20-speed power shift, and an infinitely variable transmission.
John Deere 7230R Horsepower, Weight, and Specifications:
Model Information
What are the basic details of the John Deere 7230R?
- Model Year: 2011 to 2019
- Series: 7R Series
- Type: Row-Crop tractor
Production
Where and by whom was the John Deere 7230R manufactured?
- Manufacturer: John Deere
- Factory: Waterloo, Iowa, USA
Horsepower
What is the horsepower of the John Deere 7230R?
- Engine (gross): 230 hp / 171.5 kW
- Engine (max): 253 hp / 188.7 kW
- PTO (claimed): 189 hp / 140.9 kW
- Drawbar (tested): 179.34 hp / 133.7 kW
- PTO (tested): 225.07 hp / 167.8 kW
Engine
What are the engine specifications of the John Deere 7230R?
- Engine Type: John Deere 9.0L 6-cyl diesel
- Fuel Tank:
- 133 gal / 503.4 L (PowrQuad)
- 138 gal / 522.3 L (IVT)
Mechanical
What mechanical features does the John Deere 7230R have?
- Chassis: 4x4 MFWD 4WD
- Differential Lock: Full-locking electrohydraulic rear. Limited slip front axle. Electrohydraulic on TLS Plus front axle with front brakes.
- Steering: Hydrostatic power; ActiveCommand Steering optional
- Cab: CommandView II Cab. AutoTrac ready. ISO 1178.3 ISOBUS connection. JDLink and Service ADVISOR Remote available.
- Transmissions:
- 16-speed partial power shift
- 20-speed partial power shift
- 20-speed power shift
- Infinitely variable transmission
Hydraulics
What are the hydraulic specifications of the John Deere 7230R?
- Type: Closed-center pressure and flow compensated (PFC)
- Pressure: 2958 psi / 204.0 bar
- Rear Valves: Up to 6
- Mid Valves: 0 to 2
- Pump Flow:
- 32 gpm / 121.1 lpm
- 43 gpm / 162.8 lpm (optional)
- 59 gpm / 223.3 lpm (optional)
- SCV Flow: 35 gpm / 132.5 lpm
Tractor Hitch
What are the hitch capabilities of the John Deere 7230R?
- Rear Type: 3/3N
- Control: Electrohydraulic sensing
- Rear Lift:
- 12,000 lbs / 5443 kg
- 15,200 lbs / 6894 kg (optional)
- Front Hitch: 3N (optional)
- Front Lift: 11,464 lbs / 5200 kg
- Drawbar: Category 3 drawbar standard with 4,050 to 6,000 pound rating. High-capacity 10,000 Cat. 3 drawbar optional.
Power Take-off (PTO)
What are the PTO specifications of the John Deere 7230R?
- Rear PTO: Independent
- Rear RPM Options:
- 1000 (1.75)
- 540/1000 (1.375/1.75)
- 540/540E/1000 (1.375/1.75)
- 540/540E/1000/1000E (1.375/1.75)
- Engine RPM:
- 540@1950
- 540E@1750
- 1000@1950
- 1000E@1950
- Front PTO: Optional
- Front RPM Options:
- 1000 (1.375)
- 1000 (1.75)
Dimensions & Tires
What is the size and weight of the John Deere 7230R?
- Wheelbase: 115.2 inches / 292 cm
- Weight: 24,492 to 26,585 pounds
Electrical
What are the electrical specifications of the John Deere 7230R?
- Ground: Negative
- Charging System: Alternator
- Charging Amps: 200
- Batteries: 2
- Battery CCA: 925
- Battery Volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
