John Deere 7200R Specifications

John Deere Logo

Engine Horsepower: 200 hp

Manufactured: 2011 to 2013

John Deere 7200R Summary

The John Deere 7200R was produced from 2011 to 2013 as part of the 7R Series row-crop tractors. It features an engine with a gross horsepower of 200 hp, which can reach up to 220 hp, with a PTO output of 164 hp and drawbar horsepower tested at 154.77 hp. The tractor was manufactured in Waterloo, Iowa, USA.

Tractor Icon

John Deere 7200R Horsepower, Weight, and Specifications:

Production

Where and by whom was the John Deere 7200R manufactured?

  • Manufacturer: John Deere
  • Type: Row-Crop tractor
  • Factory: Waterloo, Iowa, USA

Horsepower

What is the horsepower rating of the John Deere 7200R?

  • Engine (gross): 200 hp / 149.1 kW
  • Engine (max): 220 hp / 164.1 kW
  • PTO (claimed): 164 hp / 122.3 kW
  • Drawbar (tested): 154.77 hp / 115.4 kW
  • PTO (tested): 197.02 hp / 146.9 kW

Engine

What type of engine does the John Deere 7200R have?

  • Engine Model: John Deere 6.8L 6-cyl diesel
  • Fuel Tank:
    • 133 gal / 503.4 L (PowrQuad)
    • 138 gal / 522.3 L (IVT)

Mechanical

What mechanical features are available in the John Deere 7200R?

  • Chassis:
    • 4x2 2WD (optional)
    • 4x4 MFWD 4WD
  • Differential Lock: Full-locking electrohydraulic rear. Limited slip 4WD front axle. Electrohydraulic on TLS Plus front axle with front brakes.
  • Steering: Hydrostatic power, ActiveCommand Steering optional
  • Cab: CommandView II Cab. AutoTrac ready, except on 2WD. ISO 1178.3 ISOBUS connection. JDLink and Service ADVISOR Remote available.
  • Transmissions:
    • 16-speed partial power shift
    • 20-speed partial power shift
    • 20-speed power shift
    • Infinitely variable transmission

Hydraulics

What are the hydraulic specifications of the John Deere 7200R?

  • Type: Closed-center pressure and flow compensated (PFC)
  • Pressure: 2958 psi / 204.0 bar
  • Rear Valves: 6 (max)
  • Mid Valves: 0 to 2
  • Pump Flow:
    • 32 gpm / 121.1 lpm
    • 43 gpm / 162.8 lpm (optional)
    • 59 gpm / 223.3 lpm (optional)
  • SCV Flow: 35 gpm / 132.5 lpm

Tractor Hitch

What are the hitch capabilities of the John Deere 7200R?

  • Rear Type: 3/3N
  • Control: Electrohydraulic sensing
  • Rear Lift:
    • 12,000 lbs / 5443 kg
    • 15,200 lbs / 6894 kg (optional)
  • Front Hitch: 3N (optional)
  • Front Lift: 11,464 lbs / 5200 kg
  • Drawbar: Category 3 drawbar standard with 4,050 to 6,000 pound rating. High-capacity 10,000 Cat. 3 drawbar optional.

Power Take-off (PTO)

What are the PTO specifications of the John Deere 7200R?

  • Rear PTO: Independent
  • Rear RPM:
    • 1000 (1.75)
    • 540/1000 (1.375/1.75)
    • 540/540E/1000 (1.375/1.75)
    • 540/540E/1000/1000E (1.375/1.75)
  • Engine RPM:
    • 540@1950
    • 540E@1750
    • 1000@1950
    • 1000E@1950
  • Front PTO: Optional
  • Front RPM:
    • 1000 (1.375)
    • 1000 (1.75)

Dimensions & Tires

What are the dimensions and tire specifications of the John Deere 7200R?

  • 2WD Wheelbase: 119.4 inches / 303 cm
  • 4WD Wheelbase: 115.2 inches / 292 cm
  • Weight: 18104 to 26335 pounds

Electrical

What are the electrical specifications of the John Deere 7200R?

  • Ground: Negative
  • Charging System: Alternator
  • Charging Amps: 200
  • Batteries: 2
  • Battery CCA: 925
  • Battery Volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.