John Deere 6125M Specifications
Engine Horsepower: 125 hp
Manufactured: 2013 to 2015
John Deere 6125M Summary
John Deere 6125M was produced from 2013 to 2015. It is a utility tractor from the 6M Series, built in Mannheim, Baden-W\u00fcrttemberg, Germany. The tractor has a gross engine power of 125 hp, with a maximum of 130 hp. Variants include two- or four-wheel drive and different transmission options such as 12-speed fully synchronized, 16-speed partial power shift, and 24-speed partial power shift.
John Deere 6125M Horsepower, Weight, and Specifications:
Production
Who manufactured the John Deere 6125M and where was it built?
- Manufacturer: John Deere
- Utility tractor
- Location: Mannheim, Baden-W\u00fcrttemberg, Germany
- Original price: $74,324 (2014 SyncroPlus ROPS 2WD), $101,397 (2014 AutoQuad Cab 4WD)
Engine
What type of engine does the John Deere 6125M have?
- Engine: John Deere 4.5L 4-cylinder diesel
Transmissions
What transmission options are available for the John Deere 6125M?
- 12-speed: fully synchronized
- 16-speed: partial power shift
- 24-speed: partial power shift
Horsepower
What is the horsepower of the John Deere 6125M?
- Engine (gross): 125 hp (93.2 kW)
- Engine (max): 130 hp (96.9 kW)
- PTO (claimed): 102 hp (76.1 kW)
- Drawbar (tested): 98.31 hp (73.3 kW)
- PTO (tested): 114.88 hp (85.7 kW)
Mechanical
What are the mechanical specifications of the John Deere 6125M?
- Drive: Two- or four-wheel
- Differential lock: Electro-hydraulic rear, limited-slip front (4WD)
- Steering: Hydrostatic power
- Brakes: Hydraulic wet disc
- ROPS: Two-post foldable, cab optional with air-conditioning
- Optional: GreenStar, AutoTrac
Capacity
What are the fuel and hydraulic capacities of the John Deere 6125M?
- Fuel: 58 gal (219.5 L)
- Hydraulic system: 13.7 gal (51.9 L)
Hydraulics
What are the hydraulic specifications?
- Type: Open center pressure compensated, closed center load sensing pressure and flow compensated (optional)
- Capacity: 13.7 gal (51.9 L)
- Pressure: 2900 psi (200.0 bar)
- Rear valves: 1 to 3
- Mid valves: 2 or 3 (optional)
- Pump flow: 21.1 gpm (79.9 lpm), 30 gpm (optional) (113.6 lpm)
- SCV flow: 21.1 gpm (79.9 lpm)
Tractor Hitch
What are the hitch specifications?
- Rear Type: II/IIIN
- Control: Electrohydraulic load sensing
- Rear lift (at 24\"/610mm): 5154 lbs (2337 kg), 6247 lbs (optional) (2833 kg)
- Drawbar: Cat. II
Power Take-Off (PTO)
What are the PTO specifications?
- Rear PTO: Independent
- Rear PTO Type: 540/1000 (1.375)
- Engine RPM: 540@1932, 1000@1932
Dimensions & Tires
What are the dimensions and tire sizes?
- Wheelbase: 101.6 inches (258 cm)
- Weight: 11519 lbs (5225 kg)
- Front tire: 10.00-16
- Rear tire: 460/85R34 (2WD)
Electrical
What are the electrical specifications?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 90, 150 (optional)
- Charging volts: 14
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
