John Deere 6105M Specifications
Engine Horsepower: 105 hp
Manufactured: 2013 to 2015
John Deere 6105M Summary
The John Deere 6105M was produced from 2013 to 2015 and is part of the 6M Series of utility tractors. It features an engine with a gross horsepower of 105 hp and a maximum horsepower of 109 hp. The production took place in Mannheim, Baden-W\u00fcrttemberg, Germany.
John Deere 6105M Horsepower, Weight, and Specifications:
Production
Who manufactures the John Deere 6105M and where?
- Manufacturer: John Deere
- Type: Utility tractor
- Factory: Mannheim, Baden-W\u00fcrttemberg, Germany
- Original price (2014 SyncroPlus ROPS 2WD): $64,427
- Original price (2014 AutoQuad Cab 4WD): $91,507
Horsepower
What is the horsepower of the John Deere 6105M?
- Engine (gross): 105 hp / 78.3 kW
- Engine (max): 109 hp / 81.3 kW
- PTO (claimed): 86 hp / 64.1 kW
- Drawbar (tested): 82.13 hp / 61.2 kW
- PTO (tested): 99.07 hp / 73.9 kW
Engine
What engine is in the John Deere 6105M?
- Engine: John Deere 4.5L 4-cyl diesel
Mechanical
What are the key mechanical features of the John Deere 6105M?
- Chassis: 4x2 2WD, 4x4 MFWD 4WD
- Differential lock: Electro-hydraulic rear, limit-slip front (4WD)
- Steering: Hydrostatic power
- Brakes: Hydraulic wet disc
- Cab: Two-post foldable ROPS, Cab optional with air-conditioning, GreenStar (optional), AutoTrac (optional)
- Transmissions: 12-speed fully synchronized, 16-speed partial power shift, 24-speed partial power shift
Capacity
What are the capacities of the John Deere 6105M?
- Fuel: 58 gal / 219.5 L
- Hydraulic system: 13.7 gal / 51.9 L
Hydraulics
What are the hydraulic specifications of the John Deere 6105M?
- Type: Open center pressure compensated, Closed center load sensing pressure and flow compensated (optional)
- Capacity: 13.7 gal / 51.9 L
- Pressure: 2900 psi / 200.0 bar
- Rear valves: 1 to 3
- Mid valves: 2 or 3 (optional)
- Pump flow: 21.1 gpm / 79.9 lpm, 30 gpm / 113.6 lpm (optional)
- SCV flow: 21.1 gpm / 79.9 lpm
Tractor Hitch
What is the hitch system of the John Deere 6105M?
- Rear Type: II/IIIN
- Control: Electrohydraulic load sensing
- Rear lift (at 24\"/610mm): 4488 lbs / 2035 kg, 5864 lbs / 2659 kg (optional)
- Drawbar: Cat. II
Power Take-off (PTO)
What are the PTO specifications of the John Deere 6105M?
- Rear PTO: Independent
- Rear RPM: 540/1000 (1.375)
- Engine RPM: 540@1932, 1000@1932
Dimensions & Tires
What are the dimensions and tire specifications for the John Deere 6105M?
- Wheelbase: 101.6 inches / 258 cm
- Front tire: 10.00-16
- Rear tire: 460/85R34 (2WD)
Electrical
What are the electrical specifications of the John Deere 6105M?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 90, 150 (optional)
- Charging volts: 14
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.