Massey Ferguson 4263 Specifications
Engine Horsepower: 100 hp
Manufactured: 1997 to 1999
Massey Ferguson 4263 Summary
The Massey Ferguson 4263 was produced from 1997 to 1999 as part of the 4200 series of utility tractors. It features a Perkins 6.0L 6-cylinder diesel engine with a net engine power of 100 hp. The tractor offered three transmission variants: 8-speed nonsynchronized gear, 12-speed partially synchronized, and 12-speed synchronized shuttle. It was manufactured in Coventry, England.
Massey Ferguson 4263 Horsepower, Weight, and Specifications:
Production
Who manufactured the Massey Ferguson 4263 and where was it built?
- Manufacturer: Massey Ferguson
- Type: Utility tractor
- Built in: Coventry, England
- Original price in 1999: $35,600
Engine
What type of engine does the Massey Ferguson 4263 have?
- Model: Perkins 6.0L 6-cyl diesel
Transmissions
What are the transmission options for the Massey Ferguson 4263?
- 8-speed nonsynchronized gear
- 12-speed partially synchronized
- 12-speed synchronized shuttle
Horsepower
What are the horsepower specifications for the Massey Ferguson 4263?
- Engine (net): 100 hp / 74.6 kW
- PTO (claimed): 90 hp / 67.1 kW
- Drawbar (tested): 78.3 hp / 58.4 kW
- PTO (tested): 94.9 hp / 70.8 kW
Mechanical
What are the mechanical features of the Massey Ferguson 4263?
- Two- or four-wheel drive
- Final drives: outboard planetary
- Power steering
- Independent hydraulic wet disc brakes
- Two-post folding ROPS; Cab optional with air-conditioning
Capacity
What are the fuel and hydraulic capacities of the Massey Ferguson 4263?
- Cab Fuel: 38 gal / 143.8 L
- ROPS Fuel: 34.3 gal / 129.8 L
- Hydraulic system: 13.2 gal / 50.0 L
Hydraulics
What are the hydraulic specifications of the Massey Ferguson 4263?
- Type: open center
- Capacity: 13.2 gal / 50.0 L
- Pressure: 3046 psi / 210.0 bar
- Valves: 2 to 4
- Pump flow: 10.7 gpm / 40.5 lpm
- Optional: 17.9 gpm / 67.8 lpm
Tractor Hitch
What type of hitch does the Massey Ferguson 4263 have?
- Rear Type: II
- Control: position and draft control
- Rear lift (at ends): 5260 lbs / 2385 kg
- Optional: 6362 lbs / 2885 kg
Power Take-off (PTO)
What are the PTO specifications of the Massey Ferguson 4263?
- Rear PTO: independent
- Clutch: hydraulic wet disc
- Rear PTO Type: 540/1000 (1.375)
- Engine RPM: 540@1902, 1000@2000
Dimensions & Tires
What are the dimensions and tire specifications of the Massey Ferguson 4263?
- Wheelbase: 103 inches / 261 cm
- Weight: 7624 to 9080 pounds
- Front tire: 9.5L-15
- Rear tire: 18.4-30
Electrical
What are the electrical specifications of the Massey Ferguson 4263?
- Ground: negative
- Charging system: alternator
- ROPS Charging amps: 45
- Cab Charging amps: 70
- Batteries: 2
- Battery CCA: 590
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
