John Deere 9410R Specifications
Engine Horsepower: 410 hp
Manufactured: 2012 to 2014
John Deere 9410R Summary
The John Deere 9410R was produced from 2012 to 2014 as part of the 9R/RT Series. It features a four-wheel drive design. The tractor is powered by a John Deere 13.5L 6-cylinder diesel engine, delivering a gross power of 410 hp and a maximum power of 451 hp. The tested drawbar power is 321.85 hp, and the tested PTO power is 377.93 hp. Production took place in Waterloo, Iowa, USA.
John Deere 9410R Horsepower, Weight, and Specifications:
Production
Where and when was the John Deere 9410R manufactured?
- Manufacturer: John Deere
- Type: Four-wheel Drive (4WD) tractor
- Factory: Waterloo, Iowa, USA
- Original price: $310,609 (2014)
Horsepower
What is the horsepower of the John Deere 9410R?
- Engine (gross): 410 hp (305.7 kW)
- Engine (max): 451 hp (336.3 kW)
- PTO (claimed): 319 hp (237.9 kW)
- Drawbar (tested): 321.85 hp (240.0 kW)
- PTO (tested): 377.93 hp (281.8 kW)
Engine
What type of engine does the John Deere 9410R have?
- Type: John Deere 13.5L 6-cyl diesel
- Fuel tank: 350 gal (1324.8 L)
Mechanical
What are the mechanical features of the John Deere 9410R?
- Chassis: 4x4 articulated 4WD
- Final drives: inboard planetary
- Differential lock: fully-locking electro-hydraulic
- Steering: hydraulic power
- Brakes: hydraulic wet disc
- Trailer brakes: hydraulic optional
- Cab: CommandView II cab standard with air-conditioning
- Transmissions: 24-speed partial power shift, 18-speed full power shift
Hydraulics
What are the hydraulic specifications of the John Deere 9410R?
- Type: closed center pressure flow compensated
- Pressure: 2900 psi (200.0 bar)
- Valves: 4 to 6
- Pump flow:
- 44 gpm (166.5 lpm)
- 48 gpm (181.7 lpm, PowerShift)
- 78 gpm (295.2 lpm, High-Flow)
- SCV flow:
- 37 gpm (140.0 lpm)
- 45 gpm (170.3 lpm, 19.1mm SCV)
Tractor hitch
What are the hitch specifications for the John Deere 9410R?
- Rear Type: 4N/3, 4N/4
- Control: electronic draft sensing
- Rear lift:
- 15,300 lbs (6940 kg)
- 20,000 lbs (9072 kg, optional)
- Drawbar:
- Category 4 standard with optional heavy-duty support (2,470 kg)
- Optional Category 5 with heavy-duty support rated at 5,440 kg
Power Take-off (PTO)
What are the PTO specifications of the John Deere 9410R?
- Rear PTO: independent (optional)
- Rear RPM: 1000 (1.75)
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 9410R?
- Wheelbase: 137.8 inches (350 cm)
- Weight: 38060 to 38785 pounds
- Front tire: 710/70R38
- Rear tire: 710/70R38
Electrical
What are the electrical characteristics of the John Deere 9410R?
- Ground: negative
- Charging system: alternator
- Charging amps: 200
- Charging volts: 12
- Batteries: 3
- Battery CCA: 925
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.