Massey Ferguson 8737S Specifications
Engine Horsepower: 370 hp
Manufactured: 2018 to 2024
Massey Ferguson 8737S Summary
The Massey Ferguson 8737S, produced from 2018 to 2024, belongs to the 8700S Series of row-crop tractors. It is manufactured by Massey Ferguson, part of AGCO, in factories located in Jackson, Minnesota, USA, and Beauvais, France. The tractor is equipped with an AGCO Power 8.4L 6-cylinder diesel engine, producing 370 hp, with 320 hp claimed at the PTO and tested at 326.4 hp. No specific variants are mentioned for this model.
Massey Ferguson 8737S Horsepower, Weight, and Specifications:
Production
Who manufactures the Massey Ferguson 8737S and where is it produced?
- Manufacturer: Massey Ferguson (a part of AGCO)
- Type: Row-Crop tractor
- Factories: Jackson, Minnesota, USA; Beauvais, France
Engine
What type of engine does the Massey Ferguson 8737S have?
- Type: AGCO Power 8.4L 6-cyl diesel
- Fuel tank: 166.4 gal (629.8 L)
- Exhaust fluid (DEF): 15.85 gal (60.0 L)
Transmission
What kind of transmission system does the Massey Ferguson 8737S use?
- Type: Continuously-variable transmission
Horsepower
What is the horsepower rating of the Massey Ferguson 8737S?
- Engine: 370 hp (275.9 kW)
- PTO (claimed): 320 hp (238.6 kW)
- Drawbar (tested): 269.8 hp (201.2 kW)
- PTO (tested): 326.4 hp (243.4 kW)
Mechanical
What are the mechanical features of the Massey Ferguson 8737S?
- Drive: Four-wheel drive
- Steering: Power steering
- Brakes: Hydraulic wet disc brakes
- Trailer brakes: Pneumatic; hydraulic optional
- Cab: Standard with air-conditioning
Hydraulics
What are the hydraulic specifications of the Massey Ferguson 8737S?
- Type: Closed-center load-sensing
- Pressure: 2901 psi (200.0 bar)
- Rear valves: 6 (maximum)
- Front valves: 2 (maximum)
- Pump flow: 54.2 gpm (205.1 lpm)
Tractor Hitch
What type of hitch does the Massey Ferguson 8737S have?
- Rear Type: III/IV
- Rear lift (at ends): 26455 lbs (11999 kg)
- Front Hitch: III
- Front lift (at ends): 11023 lbs (5000 kg)
Power Take-off (PTO)
What are the PTO specifications for the Massey Ferguson 8737S?
- Rear PTO: Independent
- Clutch (rear): Electro-hydraulic
- Rear PTO Type: 540/1000 (1.375); 1000 (1.75)
- Engine RPM (rear): 540E@1577; 1000E@1605; 1000@1970
- Front PTO: Independent
- Clutch (front): Electro-hydraulic
- Front PTO Type: 1000
- Engine RPM (front): 1000@2036
Dimensions & Tires
What are the dimensions and tire specifications of the Massey Ferguson 8737S?
- Wheelbase: 122.1 inches (310 cm)
- Weight: 23810 lbs (10800 kg)
- Front tire: 620/75R30
- Rear tire: 650/85R42
Electrical
What are the electrical specifications of the Massey Ferguson 8737S?
- Ground: Negative
- Charging system: Alternator
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.